august 2006 rev 2 1/8 8 STTH3006 turbo 2 ultrafast high voltage rectifier main product characteristics features and benefits ultrafast switching low reverse current low thermal resistance reduces switching & conduction losses package insulation voltage: dop3i : 2500 v rms description the STTH3006 uses st turbo 2 600 v technology and is especially suited for use in switching power supplies, and industrial applications, such as rectification and continuous mode pfc boost diode. order codes i f(av) 30 a v rrm 600 v t j 175 c v f (typ) 1.10 v t rr (max) 50 ns part number marking STTH3006d STTH3006d STTH3006w STTH3006w STTH3006pi STTH3006pi k a k a k a to-220ac STTH3006d do-247 STTH3006w dop3i STTH3006pi table 1. absolute ratings (limiting values) symbol parameter value unit v rrm repetitive peak reverse voltage 600 v i f(rms) rms forward voltage 50 a i f(av) average forward current to-220ac / do-247 t c = 115 c = 0.5 30 a dop3i t c = 85 c = 0.5 i fsm surge non repetitive forward current t p = 10 ms sinusoidal 160 a t stg storage temperature range -65 to + 175 c t j maximum operating junction temperature 175 c www.st.com
characteristics STTH3006 2/8 1 characteristics s to evaluate the conduction losses use the following equation: p = 1.07 x i f(av) + 0.011 i f 2 (rms) table 2. thermal resistance symbol parameter value (max). unit r th(j-c) junction to case to-220ac / do-247 1.1 c/w dop3i 1.7 table 3. static electrical characteristic symbol parameter test conditions min. typ max. unit i r (1) 1. pulse test: t p = 5 ms, < 2% reverse leakage current t j = 25 c v r = v rrm 25 a t j = 150 c 80 800 v f (2) 2. pulse test: t p = 380 s, < 2% forward voltage drop t j = 25 c i f = 30 a 1.85 v t j = 150 c 1.10 1.40 table 4. dynamic characteristics symbol parameter test cond itions min. typ max. unit t rr reverse recovery time t j = 25 c i f = 0.5 a i rr = 0.25 a i r =1 a 50 ns i f = 1 a di f /dt = -50 a/s v r =30 v 50 70 i rm reverse recovery current t j = 125 c i f = 30 a v r = 400 v di f /dt = -100 a/s 811a t fr forward recovery time t j = 25 c i f = 30 a di f /dt = 100 a/s v fr = 1.1 x v fmax 500 ns v fp forward recovery voltage t j = 25 c i f = 30 a di f /dt = 100 a/s v fr = 1.1 x v fmax 2.5 v
STTH3006 characteristics 3/8 figure 1. conduction losses versus average forward current figure 2. forward voltage drop versus forward current 0 5 10 15 20 25 30 35 40 45 50 55 0 5 10 15 20 25 30 35 p(w) t =tp/t tp i (a) f(av) = 1 = 0.05 = 0.1 = 0.2 = 0.5 0 20 40 60 80 100 120 140 160 180 200 0.0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 2.0 2.2 2.4 2.6 2.8 3.0 i (a) fm v (v) fm t =150c (typical values) j t =25c (maximum values) j t =150c (maximum values) j figure 3. relative variation of thermal impedance junction to case versus pulse duration figure 4. peak reverse recovery current versus di f /dt (typical values) 0.0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 1.e-03 1.e-02 1.e-01 1.e+00 z/r th(j-c) th(j-c) t (s) p single pulse 0 5 10 15 20 25 30 0 50 100 150 200 250 300 350 400 450 500 i (a) rm di /dt(a/s) f i =2 x i f f(av) i=i f f(av) i =0.5 x i f f(av) i =0.25 x i f f(av) v =400v t =125c r j figure 5. reverse recovery time versus di f /dt (typical values) figure 6. reverse recovery charges versus di f /dt (typical values) 0 50 100 150 200 0 200 400 600 800 1000 t (ns) rr di /dt(a/s) f i=i f f(av) i =0.5 x i f f(av) v =400v t =125c r j i =2 x i f f(av) 0.0 0.5 1.0 1.5 2.0 2.5 3.0 0 200 400 600 800 1000 q (c) rr i =2 x i f f(av) i=i f f(av) i =0.5 x i f f(av) v =400v t =125c r j di /dt(a/s) f
characteristics STTH3006 4/8 figure 7. softness factor versus di f /dt (typical values) figure 8. relative variations of dynamic parameters versus junction temperature 0.0 0.1 0.2 0.3 0.4 0.5 0.6 0 50 100 150 200 250 300 350 400 450 500 s factor i2 xi t =125c f f(av) j v =400v r di /dt(a/s) f 0.00 0.25 0.50 0.75 1.00 1.25 1.50 1.75 2.00 2.25 2.50 25 50 75 100 125 i rm q rr s factor t (c) j i=i reference: t =125c f f(av) j v =400v r figure 9. transient peak forward voltage versus di f /dt (typical values) figure 10. forward recovery time versus di f /dt (typical values) figure 11. junction capacitance versus reverse voltage applied (typical values) 0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0 5.5 6.0 6.5 7.0 7.5 8.0 0 100 200 300 400 500 v (v) fp di /dt(a/s) f i=i t =125c f f(av) j 0 100 200 300 400 500 600 700 800 0 100 200 300 400 500 t (ns) fr di /dt(a/s) f i=i t =125c f f(av) j v =1.1 x v max. fr f 10 100 1000 1 10 100 1000 c(pf) v (v) r f=1mhz v =30mv t =25c osc rms j
STTH3006 package information 5/8 2 package information epoxy meets ul94, v0 cooling method: by conduction (c) recommended torque value: 0.55 nm (to-220ac) maximum torque value: 0.70 nm (to-220ac) table 5. do247 dimensions ref. dimensions millimeters inches min. typ. max. min. typ. max. a 4.85 5.15 0.191 0.203 d 2.20 2.60 0.086 0.102 e 0.40 0.80 0.015 0.031 f 1.00 1.40 0.039 0.055 f2 2.00 0.078 f3 2.00 2.40 0.078 0.094 g 10.90 0.429 h 15.45 15.75 0.608 0.620 l 19.85 20.15 0.781 0.793 l1 3.70 4.30 0.145 0.169 l2 18.50 0.728 l3 14.20 14.80 0.559 0.582 l4 34.60 1.362 l5 5.50 0.216 m 2.00 3.00 0.078 0.118 v5 5 v2 60 60 dia. 3.55 3.65 0.139 0.143 v h l5 l l3 v2 g f f3 l1 f2 l2 l4 v dia a d me
package information STTH3006 6/8 table 6. to-220ac dimensions ref. dimensions millimeters inches min. max. min. max. a 4.40 4.60 0.173 0.181 c 1.23 1.32 0.048 0.051 d 2.40 2.72 0.094 0.107 e 0.49 0.70 0.019 0.027 f 0.61 0.88 0.024 0.034 f1 1.14 1.70 0.044 0.066 g 4.95 5.15 0.194 0.202 h2 10.00 10.40 0.393 0.409 l2 16.40 typ. 0.645 typ. l4 13.00 14.00 0.511 0.551 l5 2.65 2.95 0.104 0.116 l6 15.25 15.75 0.600 0.620 l7 6.20 6.60 0.244 0.259 l9 3.50 3.93 0.137 0.154 m 2.6 typ. 0.102 typ. diam. i 3.75 3.85 0.147 0.151 a c d l7 ? i l5 l6 l9 l4 f h2 g l2 f1 e m
STTH3006 ordering information 7/8 3 ordering information 4 revision history table 7. dop3i dimensions ref. dimensions millimeters inches min. max. min. max. a 4.40 4.60 0.173 0.181 b 1.20 1.40 0.047 0.055 c 1.45 1.55 0.057 0.061 c1 0.50 0.70 0.020 0.028 d 12.15 13.10 0.474 0.516 e 15.10 15.50 0.594 0.610 e1 7.55 7.75 0.297 0.305 e 10.80 11.30 0.425 0.445 g 20.4 21.10 0.815 0.831 l 14.35 15.60 0.565 0.614 p 4.08 4.17 0.161 0.164 q 2.70 2.90 0.106 0.114 r 4.60 typ. 0.181 typ. y 15.80 16.50 0.622 0.650 r e e1 g y d q c1 c a l e b ?p ordering type marking package weight base qty delivery mode STTH3006d STTH3006d to-220ac 1.90 g 50 tube STTH3006w STTH3006w do-247 4.40 g 30 tube STTH3006pi STTH3006pi dop3i 4.46 g 30 tube date revision changes 22-may-2006 1 initial release. 10-aug-2006 2 added package insulation voltage on page 1 for dop3i.
STTH3006 8/8 please read carefully: information in this document is provided solely in connection with st products. stmicroelectronics nv and its subsidiaries (?st ?) reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described he rein at any time, without notice. all st products are sold pursuant to st?s terms and conditions of sale. purchasers are solely responsible for the choice, selection and use of the st products and services described herein, and st as sumes no liability whatsoever relating to the choice, selection or use of the st products and services described herein. no license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. i f any part of this document refers to any third party products or services it shall not be deemed a license grant by st for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoev er of such third party products or services or any intellectual property contained therein. unless otherwise set forth in st?s terms and conditions of sale st disclaims any express or implied warranty with respect to the use and/or sale of st products including without limitation implied warranties of merchantability, fitness for a parti cular purpose (and their equivalents under the laws of any jurisdiction), or infringement of any patent, copyright or other intellectual property right. unless expressly approved in writing by an authorized st representative, st products are not recommended, authorized or warranted for use in milita ry, air craft, space, life saving, or life sustaining applications, nor in products or systems where failure or malfunction may result in personal injury, death, or severe property or environmental damage. st products which are not specified as "automotive grade" may only be used in automotive applications at user?s own risk. resale of st products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by st for the st product or service described herein and shall not create or extend in any manner whatsoev er, any liability of st. st and the st logo are trademarks or registered trademarks of st in various countries. information in this document supersedes and replaces all information previously supplied. the st logo is a registered trademark of stmicroelectronics. all other names are the property of their respective owners. ? 2006 stmicroelectronics - all rights reserved stmicroelectronics group of companies australia - belgium - brazil - canada - china - czech republic - finland - france - germany - hong kong - india - israel - ital y - japan - malaysia - malta - morocco - singapore - spain - sweden - switzerland - united kingdom - united states of america www.st.com
|
